Water Brone Green Products

1C Polyurethane Dispersion

Direct to metal application. Good Corrosion &
Blocking resistance.

1C Acrylic Dispersion

ADFD type. Replace traditional solvent base coating.

1C Stoving Epoxy

Shiny Finish, Good chemical & Solvent resistance. Baking @
120 to 140 degree centigrade.

1C Epoxy Ester

Good adhesion & Resistance to corrosion. Light heat &
water resistance.

1C Aqua Primer

DTM Type. Good hardness & Corrosion resistance.

Application Refrence

Packing material

Drum, Barrels.

Auto Parts

Chasis and Frames.

Metal Protection

Tanks & StrUcture Protecion, Compressor.

Scroll to Top

1C Polyurethane Dispersion

  • Solid by Volume 30–40%
  • Application: Spray, Brush, Roller, Pad application
  • Recommended DFT: 20–30micron
  • Surface Preparation: – Substrate sanding (wood: 180–320 grit / metal: light scuffing) – Clean, dry, dust-free & grease-free surface – Moisture-free substrate (especially wood 8–12%) – Use of suitable water-based primer recommended
  • Recommended IFor : nterior wood coatings, furniture, cabinets, MDF & plywood, leather finishes, plastics, and general industrial applications requiring low odor, fast drying, eco-friendly, clear/opaque finish with good flexibility, abrasion resistance & chemical stability

1C Acrylic Dispersion

  • Solid by Volume 30–40%
  • Application: Brush, Roller, Spray
  • Recommended DFT: 15–25 micron per coat
  • Surface Preparation: – Clean, dry & dust-free substrate – Light sanding (wood: 180–320 grit / metal: scuffing) – Remove grease, oil & loose particles – Suitable water-based primer recommended for best adhesion
  • Recommended for : Interior & exterior walls, wood finishes, plastics, industrial substrates, architectural coatings, and applications requiring low odor, fast drying, eco-friendly finish with good UV resistance, color retention & smooth appearance

1C Stoving Epoxy

  • Solid by Volume 35–45%
  • Application: Conventional spray, HVLP, Electrostatic spray
  • Recommended DFT: 15–25 micron
  • Surface Preparation: – Degreasing & solvent cleaning – Sanding (180–240 grit) – Clean, dry, rust-free & contaminant-free metal surface – Epoxy-compatible primer recommended
  • Recommended for : Automotive components, electrical enclosures, metal furniture, instrument panels, machinery parts, and applications requiring a hard, chemically resistant, smooth baked film with excellent adhesion & corrosion resistance

1C Aqua Primer

  • Solid by Volume 25–35%
  • Application: Brush, Roller, Spray
  • Recommended DFT: 20–30 micron per coat
  • Surface Preparation: – Clean, dry & dust-free surface – Light sanding (wood: 180–320 grit / metal: scuffing) – Remove oil, grease & contaminants – Ensure substrate moisture within acceptable limits – Suitable for wood, metal & masonry
  • Recommended For: Interior furniture, doors, paneling, MDF, plywood, mild steel, non-ferrous surfaces (with adhesion promoter), and applications requiring low-odor, eco-friendly, fast-drying primer with good adhesion, sealing & smooth base for topcoats

Let Us Know You Before Downloading Brochure

1C Synthetic

  • Solid by Volume 35–45 %
  • Application by:- Conventional spray, Brush, Roller
  • Recommended DFT: 20–30 micron
  • Surface Sreparation – Degreasing & cleaning – Manual sanding (180–240 grit)
    Clean, dry & rust-free surface
  • Recommended for General industrial metal parts, machinery components, agricultural equipment, fabricated structures, and applications requiring economical, smooth decorative finish with good outdoor durability

1C Epoxy Ester

  • Surface Preparation: – Degreasing & cleaning – Manual / mechanical sanding (120–180 grit) – Rust-free, dry & contaminant-free surface
  • Solid by Volume 35–45 %
  • Application:- Conventional spray, Brush, Roller
  • Recommended DFT 20–30 micron,
  • Recommended for General metal fabrication, industrial machinery, automotive components, electrical panels, and applications requiring good corrosion resistance, adhesion, and chemical stability with single-component convenience

Plastic Coating

  • Solid by Volume 30–40 %
  • Application by Conventional spray, HVLP spray, Flow coat
  • Recommended DFT : 15–25 micron (single coat)
  • Surface Preparation: – Plastic substrate cleaning with plastic-safe cleaner – Static & dust removal (air gun / tack rag) – Surface flaming / adhesion promoter application (as required) – Dry, oil-free & contaminant-free substrate
  • Recommended for Automotive plastic components, two-wheeler parts, consumer electronics, household plastic items, and applications requiring flexibility, good adhesion, scratch resistance & uniform decorative finish on plastic substrates

Glass Coat

  • Solid by Volume 20–30 %
  • Application Spray, Flow coat, Dip coat
  • Recommended DFT 8–15 micron
  • Surface Preparation: – Thorough cleaning with glass cleaner / IPA – Dust-free, grease-free & moisture-free surface – Lint-free cloth se wiping – Avoid fingerprints before application
  • Recommended for : Architectural glass panels, automotive glass, appliance glass, decorative glass items, and applications requiring clear transparency, scratch resistance, chemical resistance, and improved surface durability

Wood Coating

  • Solid by Volume 25–35%
  • Application : Spray, Brush, Roller, Pad application
  • Recommended DFT 20–30 micron per coat
  • Surface Preparation: – Sanding (120 → 180 → 320 grit) – Dust removal with air & tack cloth – Clean, dry & contaminant-free surface – Moisture content 8–12% recommended
  • Recommended for Furniture, doors, cabinets, partitions, interior woodwork, MDF & plywood finishing, and applications requiring smooth finish, stain resistance, wood protection, and enhanced aesthetic appearance

Non Ferraous Coating

  • Solid by Volume 40–55 %
  • Application: Conventional spray, HVLP, Airless spray, Brush
  • Recommended DFT: 20–40 micron
  • Surface Preparation: – Degreasing & solvent cleaning – Light sanding / scuffing (320–400 grit) – Acid etching / chromate treatment (as required) – Use of suitable Non-Ferrous Primer / Etch Primer strongly recommended – Clean, dry & oxide-free surface
  • Recommended For: Aluminum, stainless steel, brass, copper, galvanized steel, extrusions, appliance parts, automotive trims, and industrial components requiring superior adhesion, corrosion resistance, and durability on non-ferrous metal substrates

Water Proofing

  • Solid by Volume 40–70%
  • Application: Brush, Roller, Airless spray
  • Recommended DFT: 200–500 micron
  • Surface Preparation: – Clean, dust-free & dry substrate – Remove algae, loose particles & old weak coatings – Crack filling with suitable sealant / polymer mortar – Damp-proofing primer / slurry coat (as required) – Ensure proper curing before topcoat application
  • Recommended for : Terraces, bathrooms, balconies, basements, water tanks, exterior walls, roofs, cement slabs, and structures requiring protection against water seepage, dampness, cracks, and long-term moisture resistance

High Solid

  • Solid by Volume 65–85%
  • Application: Conventional spray, Airless spray, HVLP
  • Recommended DFT: 60–120 micron
  • Surface Preparation: – Degreasing & solvent cleaning – Mechanical sanding (120–180 grit) – Blasting (Sa 2 / Sa 2.5) for best adhesion on steel – Clean, dry, dust-free & contaminant-free substrate
  • Recommended for Heavy-duty industrial structures, offshore equipment, pipelines, steel bridges, tanks, refineries, marine structures, and applications requiring thick protective film, low VOC, excellent corrosion resistance & long-term durability

Metalic Coating

  • Epoxy Zinc phosphate Primer
  • Solid by Volume 48 %
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Recommended DFT 30 -50 micron, surface preparation – Seven tank phosphating, Blasting, Manual cleaning
  • Recommended for Tractors, Construction equipments, general industrial applications

1C Synthetic Quick Dry

  • Solid by Volume 40–50% %
  • Application by Conventional, Conventional: Spray, HVLP, Brush, Roller
  • Recommended DFT: 25–35 micron.
  • Surface Sreparation – – Degreasing & manual cleaning – Sanding (180–240 grit) – Rust-free, clean & dry surface
  • Recommended for Automotive parts, machinery components, agricultural equipment, general metal surfaces, and industrial applications requiring fast drying & enhanced durability

1C Stoving Thermosetting Acrylic

  • Solid by Volume 35–45 %
  • Application:- Conventional spray, HVLP, Electrostatic spray
  • Surface Preparation: – Degreasing & cleaning – Sanding (240–320 grit) – Clean, dry & contaminant-free metal surface
  • Recommended DFT 18–25 micron
  • Recommended for:- Automotive components, appliances, metal furniture, lighting fixtures, electrical enclosures, and industrial parts requiring a hard, durable, glossy baked finish with excellent weatherability, color retention & chemical resistance

1C Stoving Alkyd Amino

  • Solid by Volume 35–45 %
  • Application by Conventional, HVLP, Electrostatic spray
  • surface preparation – Degreasing & cleaning – Sanding (180–240 grit) – Clean, dry & contaminant-free surface
  • Recommended DFT 20–30 micron,
  • Recommended for Automotive components, appliances, metal furniture, electrical enclosures, industrial parts, and applications requiring hard, durable, glossy baked enamel finish with good chemical & scratch resistance

2C Epoxy

  • Solid by Volume 55–65 %
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Surface Preparation:– Degreasing & cleaning
    Sanding (120–180 grit) / Mechanical cleaning
    Blasting (Sa 2.5) for best adhesion
    Dry, rust-free & contaminant-free surface
  • Recommended DFT 30 -50 micron, surface preparation – Seven tank phosphating, Blasting, Manual cleaning
  • Recommended for:- Heavy-duty industrial structures, machinery, metal fabrications, pipelines, automotive parts, and applications requiring excellent corrosion resistance, adhesion, and chemical durability

2C Polyurethane

  • Solid by Volume 50–60 %
  • Application Conventional spray, HVLP, Airless spray
  • surface preparation – Seven tank phosphating, Blasting, Manual cleaning
  • Recommended DFT 30 -50 micron
  • Recommended for Tractors, Construction equipments, general industrial applications

2C Acrylic

  • Solid by Volume 45–55 %
  • Application by Conventional-Conventional spray, HVLP, Airless spray
  • Recommended DFT 30 -40 micron
  • Surface Preparation: – Degreasing & cleaning – Sanding (240–320 grit) – Smooth, dry & contaminant-free surface
  • Recommended For:- Automotive refinishing, industrial components, machinery, metal structures, and applications requiring high gloss, UV resistance, and long-term durability

2C Acrylic Polyurethane

  • Solid by Volume 50–60 %
  • Recommended DFT 30 -50 micron,.
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Surface Preparation: – Degreasing & solvent cleaning – Sanding (240–320 grit) – Smooth, dry, dust-free & contaminant-free surface – For metal: Epoxy / PU primer system recommended
  • Recommended for Automotive topcoats, industrial machinery, agricultural equipment, metal structures, OEM finishing, and applications requiring excellent gloss, UV resistance, chemical resistance, weather durability, and long-term color retention

Thinner

  • Solid by Volume 0% (pure solvent blend)
  • Recommended DFT : Not applicable
  • Application by – Spray viscosity adjustment – Equipment cleaning – Brush/Roller application ke liye reduction – Surface wiping (as recommended)
  • Surface Preparation: – Remove oil, grease & contaminants using suitable thinner – Wiping with clean lint-free cloth – Ensure surface dry & dust-free before coating
  • Recommended for Synthetic, PU, Acrylic, Epoxy, NC & general industrial coatings ke dilution, viscosity control, spray smoothness improvement, and equipment/line cleaning applications (coating type ke hisaab se specific thinner required hota hai)

Metalic Coating

  • Solid by Volume 30–40 %
  • Recommended DFT 15–25 micron
  • Application by Conventional spray, HVLP, Airless spray
  • Surface Preparation: – Degreasing & solvent cleaning – Sanding (320–400 grit for smooth finish) – Dust-free, dry & contaminant-free surface – Proper priming recommended (Epoxy / PU Primer)
  • Recommended for Automotive finishes, two-wheeler parts, industrial machinery, decorative metal parts, furniture, and applications requiring metallic appearance, high aesthetic value, reflective shine, and uniform flake orientation

2C Concrete Primer

  • Solid by Volume 50–60 %
  • Recommended DFT 40–60 micron,
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Surface Preparation: – Concrete surface fully cured (minimum 28 days) – Remove dust, laitance, loose particles – Mechanical grinding / wire brushing – Moisture-free, clean & dry substrate – Oil/grease removal by detergent wash
  • Recommended for Industrial concrete floors, warehouses, RCC structures, parking areas, chemical plant flooring, and applications requiring strong adhesion, moisture resistance, and improved bonding for epoxy/PU topcoats

1C Stoving Epoxy Ester

  • Solid by Volume 35–45%
  • Application by Conventional spray, HVLP, Electrostatic spray
  • Surface Preparation: – Degreasing & solvent cleaning – Sanding (180–240 grit) – Clean, dry, rust-free & contaminant-free surface
  • Recommended DFT 18–25 micron
  • Recommended for Automotive parts, industrial metal components, appliances, office furniture, and applications requiring hard, durable baked film with good corrosion resistance, chemical stability, and smooth finish

2C Epoxy

  • Solid by Volume 55–65 %
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Surface Preparation: – Degreasing & solvent cleaning – Manual / mechanical sanding (120–180 grit) – Blasting (Sa 2.5) for optimum adhesion – Rust-free, dry & contaminant-free substrate
  • Recommended DFT 40–60 micron.
  • Recommended for Heavy-duty industrial structures, automotive parts, pipelines, fabrication units, machinery, marine & chemical-exposed environments, and applications requiring excellent corrosion resistance, adhesion, and chemical durability