Specialized Unique Products

Plastic Coating

Primer & Top coat coating on various plastic surfaces ABS, PP,
Nylon, Polycarbonate etc..

Glass Coat

Pigmented & clear coat provide long lasting durable protection,
scratch resistance, water, dirt, heat & UV protection.

Wood Coating

Various Pigmented & clear coating for Table top application, stronger
protection from water, heat, stain, low dirt pick up Excellent scratch &
abrasion resistance.

Non Ferraous Coating

Protective coating on Aluminium, GI, Brass, Copper for window & door
frames, handrails, haritage building, architectural & decorative work.

Water Proofing

Barrier over surfaces of foundations, roofs, walls, terrace,
water tanks & swimming pools to prevent water penetration.

High Solid

Low VOC content and higher spreading rate.

Metalic Coating

Resist bleaching or fading. Give more durable finish. It can be uses in
SUVs, buses, cars, coaches and decorative purpose.

Application Refrence

Glass coating, Spectacle Frames.
Metallic coating.
Hair Clip
Antique Furniture. Drawer Pulls & Handle.
Polycarbonate, Acylic
Plastic = ABS, PP, Nylon.
FRP, GI, Aluminium, Brass, Copper.
Scroll to Top

Plastic Coating

  • Solid by Volume 30–40 %
  • Application by Conventional spray, HVLP spray, Flow coat
  • Recommended DFT : 15–25 micron (single coat)
  • Surface Preparation: – Plastic substrate cleaning with plastic-safe cleaner – Static & dust removal (air gun / tack rag) – Surface flaming / adhesion promoter application (as required) – Dry, oil-free & contaminant-free substrate
  • Recommended for Automotive plastic components, two-wheeler parts, consumer electronics, household plastic items, and applications requiring flexibility, good adhesion, scratch resistance & uniform decorative finish on plastic substrates

Glass Coat

  • Solid by Volume 20–30 %
  • Application Spray, Flow coat, Dip coat
  • Recommended DFT 8–15 micron
  • Surface Preparation: – Thorough cleaning with glass cleaner / IPA – Dust-free, grease-free & moisture-free surface – Lint-free cloth se wiping – Avoid fingerprints before application
  • Recommended for : Architectural glass panels, automotive glass, appliance glass, decorative glass items, and applications requiring clear transparency, scratch resistance, chemical resistance, and improved surface durability

Wood Coating

  • Solid by Volume 25–35%
  • Application : Spray, Brush, Roller, Pad application
  • Recommended DFT 20–30 micron per coat
  • Surface Preparation: – Sanding (120 → 180 → 320 grit) – Dust removal with air & tack cloth – Clean, dry & contaminant-free surface – Moisture content 8–12% recommended
  • Recommended for Furniture, doors, cabinets, partitions, interior woodwork, MDF & plywood finishing, and applications requiring smooth finish, stain resistance, wood protection, and enhanced aesthetic appearance

Non Ferraous Coating

  • Solid by Volume 40–55 %
  • Application: Conventional spray, HVLP, Airless spray, Brush
  • Recommended DFT: 20–40 micron
  • Surface Preparation: – Degreasing & solvent cleaning – Light sanding / scuffing (320–400 grit) – Acid etching / chromate treatment (as required) – Use of suitable Non-Ferrous Primer / Etch Primer strongly recommended – Clean, dry & oxide-free surface
  • Recommended For: Aluminum, stainless steel, brass, copper, galvanized steel, extrusions, appliance parts, automotive trims, and industrial components requiring superior adhesion, corrosion resistance, and durability on non-ferrous metal substrates

Water Proofing

  • Solid by Volume 40–70%
  • Application: Brush, Roller, Airless spray
  • Recommended DFT: 200–500 micron
  • Surface Preparation: – Clean, dust-free & dry substrate – Remove algae, loose particles & old weak coatings – Crack filling with suitable sealant / polymer mortar – Damp-proofing primer / slurry coat (as required) – Ensure proper curing before topcoat application
  • Recommended for : Terraces, bathrooms, balconies, basements, water tanks, exterior walls, roofs, cement slabs, and structures requiring protection against water seepage, dampness, cracks, and long-term moisture resistance

High Solid

  • Solid by Volume 65–85%
  • Application: Conventional spray, Airless spray, HVLP
  • Recommended DFT: 60–120 micron
  • Surface Preparation: – Degreasing & solvent cleaning – Mechanical sanding (120–180 grit) – Blasting (Sa 2 / Sa 2.5) for best adhesion on steel – Clean, dry, dust-free & contaminant-free substrate
  • Recommended for Heavy-duty industrial structures, offshore equipment, pipelines, steel bridges, tanks, refineries, marine structures, and applications requiring thick protective film, low VOC, excellent corrosion resistance & long-term durability

Metalic Coating

  • Solid by Volume 30–40 %
  • Recommended DFT 15–25 micron
  • Application by Conventional spray, HVLP, Airless spray
  • Surface Preparation: – Degreasing & solvent cleaning – Sanding (320–400 grit for smooth finish) – Dust-free, dry & contaminant-free surface – Proper priming recommended (Epoxy / PU Primer)
  • Recommended for Automotive finishes, two-wheeler parts, industrial machinery, decorative metal parts, furniture, and applications requiring metallic appearance, high aesthetic value, reflective shine, and uniform flake orientation

Let Us Know You Before Downloading Brochure

1C Synthetic

  • Solid by Volume 35–45 %
  • Application by:- Conventional spray, Brush, Roller
  • Recommended DFT: 20–30 micron
  • Surface Sreparation – Degreasing & cleaning – Manual sanding (180–240 grit)
    Clean, dry & rust-free surface
  • Recommended for General industrial metal parts, machinery components, agricultural equipment, fabricated structures, and applications requiring economical, smooth decorative finish with good outdoor durability

1C Aqua Primer

  • Solid by Volume 25–35%
  • Application: Brush, Roller, Spray
  • Recommended DFT: 20–30 micron per coat
  • Surface Preparation: – Clean, dry & dust-free surface – Light sanding (wood: 180–320 grit / metal: scuffing) – Remove oil, grease & contaminants – Ensure substrate moisture within acceptable limits – Suitable for wood, metal & masonry
  • Recommended For: Interior furniture, doors, paneling, MDF, plywood, mild steel, non-ferrous surfaces (with adhesion promoter), and applications requiring low-odor, eco-friendly, fast-drying primer with good adhesion, sealing & smooth base for topcoats

1C Epoxy Ester

  • Surface Preparation: – Degreasing & cleaning – Manual / mechanical sanding (120–180 grit) – Rust-free, dry & contaminant-free surface
  • Solid by Volume 35–45 %
  • Application:- Conventional spray, Brush, Roller
  • Recommended DFT 20–30 micron,
  • Recommended for General metal fabrication, industrial machinery, automotive components, electrical panels, and applications requiring good corrosion resistance, adhesion, and chemical stability with single-component convenience

1C Stoving Epoxy

  • Solid by Volume 35–45%
  • Application: Conventional spray, HVLP, Electrostatic spray
  • Recommended DFT: 15–25 micron
  • Surface Preparation: – Degreasing & solvent cleaning – Sanding (180–240 grit) – Clean, dry, rust-free & contaminant-free metal surface – Epoxy-compatible primer recommended
  • Recommended for : Automotive components, electrical enclosures, metal furniture, instrument panels, machinery parts, and applications requiring a hard, chemically resistant, smooth baked film with excellent adhesion & corrosion resistance

1C Acrylic Dispersion

  • Solid by Volume 30–40%
  • Application: Brush, Roller, Spray
  • Recommended DFT: 15–25 micron per coat
  • Surface Preparation: – Clean, dry & dust-free substrate – Light sanding (wood: 180–320 grit / metal: scuffing) – Remove grease, oil & loose particles – Suitable water-based primer recommended for best adhesion
  • Recommended for : Interior & exterior walls, wood finishes, plastics, industrial substrates, architectural coatings, and applications requiring low odor, fast drying, eco-friendly finish with good UV resistance, color retention & smooth appearance

1C Polyurethane Dispersion

  • Solid by Volume 30–40%
  • Application: Spray, Brush, Roller, Pad application
  • Recommended DFT: 20–30micron
  • Surface Preparation: – Substrate sanding (wood: 180–320 grit / metal: light scuffing) – Clean, dry, dust-free & grease-free surface – Moisture-free substrate (especially wood 8–12%) – Use of suitable water-based primer recommended
  • Recommended IFor : nterior wood coatings, furniture, cabinets, MDF & plywood, leather finishes, plastics, and general industrial applications requiring low odor, fast drying, eco-friendly, clear/opaque finish with good flexibility, abrasion resistance & chemical stability

Metalic Coating

  • Epoxy Zinc phosphate Primer
  • Solid by Volume 48 %
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Recommended DFT 30 -50 micron, surface preparation – Seven tank phosphating, Blasting, Manual cleaning
  • Recommended for Tractors, Construction equipments, general industrial applications

1C Synthetic Quick Dry

  • Solid by Volume 40–50% %
  • Application by Conventional, Conventional: Spray, HVLP, Brush, Roller
  • Recommended DFT: 25–35 micron.
  • Surface Sreparation – – Degreasing & manual cleaning – Sanding (180–240 grit) – Rust-free, clean & dry surface
  • Recommended for Automotive parts, machinery components, agricultural equipment, general metal surfaces, and industrial applications requiring fast drying & enhanced durability

1C Stoving Thermosetting Acrylic

  • Solid by Volume 35–45 %
  • Application:- Conventional spray, HVLP, Electrostatic spray
  • Surface Preparation: – Degreasing & cleaning – Sanding (240–320 grit) – Clean, dry & contaminant-free metal surface
  • Recommended DFT 18–25 micron
  • Recommended for:- Automotive components, appliances, metal furniture, lighting fixtures, electrical enclosures, and industrial parts requiring a hard, durable, glossy baked finish with excellent weatherability, color retention & chemical resistance

1C Stoving Alkyd Amino

  • Solid by Volume 35–45 %
  • Application by Conventional, HVLP, Electrostatic spray
  • surface preparation – Degreasing & cleaning – Sanding (180–240 grit) – Clean, dry & contaminant-free surface
  • Recommended DFT 20–30 micron,
  • Recommended for Automotive components, appliances, metal furniture, electrical enclosures, industrial parts, and applications requiring hard, durable, glossy baked enamel finish with good chemical & scratch resistance

2C Epoxy

  • Solid by Volume 55–65 %
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Surface Preparation:– Degreasing & cleaning
    Sanding (120–180 grit) / Mechanical cleaning
    Blasting (Sa 2.5) for best adhesion
    Dry, rust-free & contaminant-free surface
  • Recommended DFT 30 -50 micron, surface preparation – Seven tank phosphating, Blasting, Manual cleaning
  • Recommended for:- Heavy-duty industrial structures, machinery, metal fabrications, pipelines, automotive parts, and applications requiring excellent corrosion resistance, adhesion, and chemical durability

2C Polyurethane

  • Solid by Volume 50–60 %
  • Application Conventional spray, HVLP, Airless spray
  • surface preparation – Seven tank phosphating, Blasting, Manual cleaning
  • Recommended DFT 30 -50 micron
  • Recommended for Tractors, Construction equipments, general industrial applications

2C Acrylic

  • Solid by Volume 45–55 %
  • Application by Conventional-Conventional spray, HVLP, Airless spray
  • Recommended DFT 30 -40 micron
  • Surface Preparation: – Degreasing & cleaning – Sanding (240–320 grit) – Smooth, dry & contaminant-free surface
  • Recommended For:- Automotive refinishing, industrial components, machinery, metal structures, and applications requiring high gloss, UV resistance, and long-term durability

2C Acrylic Polyurethane

  • Solid by Volume 50–60 %
  • Recommended DFT 30 -50 micron,.
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Surface Preparation: – Degreasing & solvent cleaning – Sanding (240–320 grit) – Smooth, dry, dust-free & contaminant-free surface – For metal: Epoxy / PU primer system recommended
  • Recommended for Automotive topcoats, industrial machinery, agricultural equipment, metal structures, OEM finishing, and applications requiring excellent gloss, UV resistance, chemical resistance, weather durability, and long-term color retention

Thinner

  • Solid by Volume 0% (pure solvent blend)
  • Recommended DFT : Not applicable
  • Application by – Spray viscosity adjustment – Equipment cleaning – Brush/Roller application ke liye reduction – Surface wiping (as recommended)
  • Surface Preparation: – Remove oil, grease & contaminants using suitable thinner – Wiping with clean lint-free cloth – Ensure surface dry & dust-free before coating
  • Recommended for Synthetic, PU, Acrylic, Epoxy, NC & general industrial coatings ke dilution, viscosity control, spray smoothness improvement, and equipment/line cleaning applications (coating type ke hisaab se specific thinner required hota hai)

2C Concrete Primer

  • Solid by Volume 50–60 %
  • Recommended DFT 40–60 micron,
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Surface Preparation: – Concrete surface fully cured (minimum 28 days) – Remove dust, laitance, loose particles – Mechanical grinding / wire brushing – Moisture-free, clean & dry substrate – Oil/grease removal by detergent wash
  • Recommended for Industrial concrete floors, warehouses, RCC structures, parking areas, chemical plant flooring, and applications requiring strong adhesion, moisture resistance, and improved bonding for epoxy/PU topcoats

1C Stoving Epoxy Ester

  • Solid by Volume 35–45%
  • Application by Conventional spray, HVLP, Electrostatic spray
  • Surface Preparation: – Degreasing & solvent cleaning – Sanding (180–240 grit) – Clean, dry, rust-free & contaminant-free surface
  • Recommended DFT 18–25 micron
  • Recommended for Automotive parts, industrial metal components, appliances, office furniture, and applications requiring hard, durable baked film with good corrosion resistance, chemical stability, and smooth finish

2C Epoxy

  • Solid by Volume 55–65 %
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Surface Preparation: – Degreasing & solvent cleaning – Manual / mechanical sanding (120–180 grit) – Blasting (Sa 2.5) for optimum adhesion – Rust-free, dry & contaminant-free substrate
  • Recommended DFT 40–60 micron.
  • Recommended for Heavy-duty industrial structures, automotive parts, pipelines, fabrication units, machinery, marine & chemical-exposed environments, and applications requiring excellent corrosion resistance, adhesion, and chemical durability